Please note: PureFlo® PAPR have a 2-week return window under the risk-free trial period. After, products cannot be returned.
PureFlo 3000 PAPR Respirator Hood is an innovative all-in-one head, face, and respiratory protection with enhanced comfort and performance. This unique respirator design relies on a lightweight face seal directly behind the visor that cinches comfortably around the face*. Unlike many respirators, the PureFlo 3000 can be used by men with facial hair because the face shield can be manually tightened around most beards. (*The full hood model cinches around the shoulders, not around the face.)
This new all-in-one NIOSH approved air-purifying protection system is lighter weight with a lower profile than the competition. It offers maximum mobility and simplified use, weighing less than 3 lbs in most configurations. Ideal in healthcare & emergency response environments for protection against respiratory hazard particulates. Available with a visor/faceshield and standard face seal or Tychem face seal, or alternately with a full disposable slip-over hood with clear viewing window instead of a face shield, providing enhanced splash protection.
The PureFlo 3000 was awarded Frost & Sullivan’s New Product Innovation Award. It is modular and provides superior protection for light-to-medium duty industrial environments. An all-in-one respirator optimized for maximum mobility and minimal discomfort. The head-mounted design eliminates the need for hoses and belts, virtually eliminating snag hazards in tight quarters. A breakthrough in head-borne weight, comfort, and durability, the PureFlo 3000 is made for keeping industrial workforces safe, while simultaneously enhancing productivity.
Key Features
Adaptable fit means no “fit test” is required.
All-in-one design includes:
Head protection – structural support frame or with optional bump cap (lightweight hard hat) for easier cleaning
Eye protection – face shield or body over-hood with clear viewing window
Face protection
Respiratory protection – full face seal or body hood
Ear protection option (Contact us to add # PF3000-04-001 Ear Defenders NNR 22)
No support belts, tubes, etc. needed
APF 1000 with a face shield and an optional over-hood
Low profile and lightweight to minimize fatigue
NIOSH approved
Low breathing resistance cutting workload
Compatible with a fall protection harness
High flow rate and no snag hazards
Quick change HEPA filter with optional pre-filter and spark arrestor
Miniaturized, fast-charging Lithium Ion battery
Optional, cost-effective, disposable slip-over hoods can be ordered for the face shield models to minimize contamination risk
Optional welding helmet option
Optional ear protection accessory
Red and green LED light indicates optimal or low battery life/airflow
ABS plastic construction with polycarbonate face shield
Each Unit Includes:
1 x User Manual
1 x NIOSH HEPA Filter
2 x Batteries
1 x Battery Charger Kit
1 x Cleaning Plugs
Product Data Sheet
Product Education
Product Warranty
Instructions For Use
COVID-19 Cleaning Guidelines
Approvals
PureFlo 3000
System Classification
Powered Air-Purifying Respirator (PAPR)
Head Protection (Hard Hat)
ANSI/ISEA Z89.1:2014 Type 1 Class G
Face-Shield/Eye Protection
ANSI/ISEA Z87.1:2015 Impact Rated (Z87+)
Respiratory
NIOSH 42CFR84, CSA standard Z94.4
Hearing Protection *Optional*
ANSI S12.6-2010 choice of NRR 22, 25, or 28
Filter Type
High Efficiency Particulate Air (HEPA) filter; optional pre-filter,
odor nuisance filter, spark arrestor
Initial Design Flow Rate
230 L/min (170L/min minimum) : 8.1 CFM (6 CFM Minimum)
Noise Level
Less than 80 dBA (based on OSHA 29 CFR 1910.95 subpart G)
Assigned Protection Factor (APF)
APF 25 (per OSHA assigned protection factor
federal register notice 71:50121-50192,
dated 8/24/2006), APF 1000 with Overhood
Head Size Range
6-3/4″ – 8″
Battery Type
Lithium Ion
Battery Duration
4-5 Hours
Recharge Time
2 Hours
Environmental Protection
IP54 (In use) IP55 (Cleaning), IEC 60509:1989
Weight – Skeleton Cap only
2.1 lbs.
PureFlo 3000 PAPR Models
PF3000-F6NA-03
PF3000 Respirator, Open Frame, Tychem QC Hood
PF3000-F2SB-03
PF3000 Respirator, Open Frame, Clear Visor, Standard Face Seal
PF3000-F2TB-03
PF3000 Respirator, Open Frame, Clear Visor, Tychem QC Face Seal
PF3000-H2SB-03
PF3000 Respirator, Blue Hard Hat, Clear Visor, Standard Face Seal
PF3000-H2TB-03
PF3000 Respirator, Blue Hard Hat, Clear Visor, Tychem QC Face Seal
Optional Accessories and replacement parts (contact us to order)
PF3000-04-001
Ear Defenders NNR 22 ear protection attachment
PF3000-02-002
NIOSH HEPA Filter (5-pack)
PF3000-02-002BP
NIOSH HEPA Filter (25-pack)
PF3000-02-002MP
NIOSH HEPA Filter (50-pack)
PF3000-04-005
Pre-filter (50-pack)
PF3000-03-072
Filter Cover – Blue
PF3000-03-084
Filter Cover – Black
PF3000-03-061
Filter Cover Retaining Clips (10-pack) (5 sets of 2)
PF3000-03-066
Air inlet adaptor
PF3000-03-066BP
Air inlet adaptor (10-pack)
PF3000-03-066MP
Air inlet adaptor (250-pack)
PF3000-03-003
Battery
PF3000-03-047
Battery charger kit
PF3000-04-019
10 Station Battery Multicharger **
PF3000-03-015
AC power supply cable North America
PF3000-04-021
12V DC Adapter Cable
PF3000-03-070
Visor Assembly (includes:faceshield, frame, clips and mounting hardware)
PF3000-03-044
Faceshield
PF3000-04-022
Visor protector (4-pack)
PF3000-03-016
Faceshield Retaining Clips (set of 2, left and right)
PF3000-03-057
Headband (with clips, without straps)
PF3000-03-058
Headband V2 (with clips and straps, includes comfort pads)
PF3000-03-059
Comfort pad kit
PF3000-03-024
Tychem QC faceseal (10-pack)
PF3000-03-022
Tychem QC disposable drawstring hood (10-pack)
PF3000-03-023
Tychem QC disposable slipover hood (10-pack)
PF3000-03-065
Hood Attachment Blanking Caps (set of 2)
PF3000-03-067
Hard Hat – Blue
PF3000-03-014
Cleaning plugs (set of 3)
PF3000-03-046
PureFlo bag
PR02054SP
Purewipes Easy Cleaning Wipes – 100/Pack
Reviews
There are no reviews yet.