38-430 Port Cap Kit, 2 holes, 1/4-28 UNF, SS Thread, Natural, for 38mm Plastic Bottles

38-430 Port Cap Kit, reinforced Stainless Steel 1/4-28 UNF threads, PTFE inner, white spin collar, designed for use with plastic bottles that have a Nalgene® 38-430 closure. 304 Stainless steel (SS) threaded insert minimizes cross-threading on soft PTFE ports and is ideal when tubing adapters are regularly removed and re-attached. Create a closed system using port caps to prevent hazardous vapor evaporation in the lab. These port caps accept standard 1/4″-28 UNF fittings to easily connect semi-rigid tubing. Choose tubing adapters based on your tubing size. A set of plugs in included to maintain a closed system when holes are not in use. Note: we suggest you order an optional vent filter to allow for pressure changes and safe off-gassing (not included) when a port cap does not have a built-in vent. Kit includes plugs for each hole Autoclavable Threaded holes are angled at 10° for easy access Use with 1/4-28 UNF adapters based on your tubing size Use with semi-rigid tubing equal to or less than 1/8″ (3.2 mm) OD (not included) to create a solvent delivery system (tubing goes all the way in the bottle) Tubing larger than 1/8″ can be used with barb fittings as part of a solvent waste reservoir (tubing ends at the cap) Prevents evaporation of volatile compounds Polypropylene outer collar (non-wetted) with a PTFE inner Anti-twist free-spin collar rotates independently to prevent tangling lines Please note: it is not possible to ground glass and plastic (non-Justrite®) containers; this may result in a safety hazard with flammable solvents. WARNING: This product can expose you to chemicals including Tetrafluoroethylene, which are known to the State of California to cause cancer. Prop 65 Warning